Industrial Bushings - QD Bushing | Brance-Krachy

Home / Power Transmission / Industrial Bushings

Request A Quote

Industrial Bushings & QD Bushing

Power transmission industrial bushings from Brance-Krachy represent top quality taper- lock bushings and QD bushings from Dodge Power Transmission and Martin Sprocket. For bushings common in oil field applications, choose Oilfield QD Bushings from the menu to the left.

1008-1615 Bushings Baldor Dodge Taper-Lock industrial bushings available for all power transmission projects. Shop Now	2012-2525 Bushings When used with a Para-Flex GTL coupling, the torque capacity rating is 7150 in-lb for the 2012 bushing, and 11,600 in-lb for the 2517 bushing. Baldor Dodge Taper-Lock Shop Now	3020-3030 Bushings The design of the Dodge Taper-Lock bushing provides secure locking and a more stable drive system. Shop Now	3535-4545 Bushings Brance-Krachy offers a full line of Baldor Dodge Taper-Lock® bushings that are shaft-ready, and available in inch and metric standard sizes. These quality bushings eliminate the need for bored-to-size drive components, and can drastically reduce your inventory requirements. Shop Now
D-Series & E Bushings The phrase "QD Bushing" is a registered trade mark and the bushings are manufactured under license. This means that QD stock bore bushings and sheaves conform to standardized QD dimensions and types. Metric sizes available. Shop Now	F & H Bushings F size QD bushings available for your industrial drive project, with bore sizes from 1" to 4". The smaller H tapered bushings are split and keyed to both shaft and hub for a simple and reliable installation, with bore sizes available from 3/8" to 1-1/2". Shop Now	Gears Special-order gears available for your gearmotor, gear reducer, or other power transmission equipment. Shop Now	JA - J - M Bushings Quality bushings from Martin Sprocket and Baldor keep your project moving with serviceability and reliability. J bushings have a bore range of 1-7/16" to 4-1/2". M size bushings are slightly larger, with a bore range of 2" to 5½". The much smaller JA bushing has a bore size from Shop Now
N - P - Q - SD Bushings All Baldor QD bushings are compatible with standard mounting, where the bushing flange faces the machine or motor, or for reverse mounting where the bushing flange faces away from the machine or motor. In either installation, the capscrews are accessible from the outside for convenient servicing. Shop Now	SDS & SH Bushings Baldor SH and SDS bushings are supplied in ductile iron. Tapered bushings are available from stock in a wide variety of bores and keyseats; contact us if your specified part is not listed below. All ½" bore sizes are stocked without a key seat. Shop Now	SF Bushings To install Baldor QD Sheaves, the cap screws are used as pull-wrench only; no additional leverage is necessary. To remove QD Sheaves, the cap screws are taken out and used as jack screws. A few quick turns on each screw, and the tight grip of the bushing on the shaft is easily broken. Shop Now	SK Bushings The full-split design and tapered precision fit of Baldor SK bushings, allows them to compress evenly through the overall bushing length, so the shaft is gripped with tremendous pressure, the equivalent of a press fit on the shaft. Contact us for all industrial QD bushings. Shop Now